All Classes and Interfaces
Class
Description
Adder with nIn inputs.
Canvas representing an adder.
Implements Signaling of BaseWiringComponent
VirtualSubcarrierSerial2Parallel inserts zeros into the outgoing ParallelSignal.
Has a delay of SyncSample + 1, e.g. setSyncSample(0) results in a delay of 1
No trigger merge.
In: ComplexSignal or AnalogSignal - bandpass
Out: ComplexSignal, detection signal
In: ComplexSignal
Out: ComplexSignal
Additive white Gaussian noise (AWGN) is a basic channel model that adds white Gaussian noise to the input signal.
The decider maps the analog input signal to a digital output signal.
Maps bitsPerSymbol, e.g. 4, incoming bits (DigitalSignal)
to a symbol (complex signal).
Trigger merge of all in signals to out signal.
The signal of input 1 is delayed, i.e. the 2nd connected input.
FIR-Filter for any signal type, also complexSignal Implementing class must set impulse response coefficients.
In: ComplexSignal
Out: AnalogSignal
Waveforms generating complex signals.
Outputs 2 signals: the 2nd is 90° behind
phaseOffset = 0°: sine and cosine
phaseOffset = 90°: cosine and -sine
phaseOffset = 180°: -sine and -cosine
phaseOffset = 270°: -cosine and sine
Outputs 2 signals: the 2nd is 90° behind.
Regarded externally, the MultipleInputMeter has no outputs.
Reduces the sampling rate by a ratio.
Down sampler for analog and digital signals.
Canvas for a system.
Multiplexer with 2 inputs alternating switches input line to send to the output.
In: ComplexSignal or AnalogSignal - bandpass
Out: ComplexSignal, detection signal
In: ComplexSignal
Out: AnalogSignal
System to expand the amplitudes of a signal with
the 13-Segment-Kennlinie
FIR-Filter
Implementing class must set impulse response coefficients.
Canvas for a system.
White Gaussian noise source producing analog or complex signals
Example for dependent / readonly parameter
IIR-Filter
Canvas for a system.
Divides datastream into an inphase and quadrature stream.
In: ComplexSignal
Out: AnalogSignal
Class to kompress the amplitudes of a incoming siganl with
the 13-Segment-Kennlinie
Supported Waveforms of the signal generator.
Has 3 inputs: 1 Laser as
Used for Amplitudenbegrenzung
Base Class for a MISO system canvas, e.g. adder or multiplier.
Moving average filter.
Multiplexer is a MISO UpConverter.
Multiplier with nIn inputs.
Compiles the OFDM symbol as parallel signal block.
The in and outgoing signals are of type ParallelSignal.
In: AnalogSignal
Out: ComplexSignal
In: AnalogSignal
Out: ComplexSignal
In: ComplexSignal
Out: AnalogSignal
In: ComplexSignal
Out: AnalogSignal
Also uniform quantiser.
Uniform quantiser.
Raised Cosine (RC)
Base class for cos-roll-off lowpass filter
Raised Cosine (RC)
Base class for cos-roll-off highpass filter
2 incoming real signals are downconverted to one complex signal..
Trigger merge of both in signals to the out signal.
Supported Waveforms of the signal generator.
Ideal bandpass filter.
Ideal highpass filter.
Ideal low pass filter / si impulse.
Base class for low and high pass filter
Serial2Parallel converter for analog and digital signals.
No trigger merge.
Root Raised Cosine (RRC)
Cosinus-roll-off-Filter (root-raised-cosine filter)
Scale FIR filter coefficients.
Serial2Parallel converter for analog and digital signals.
Has a delay of SyncSample + 1, e.g. setSyncSample(0) results in a delay of 1
No trigger merge.
Produces analog signals with selectable wave forms sine, triangle, rectangle ...
Class for a TerminationSystem with an TerminationInPort.
Down sampler for analog and digital signals.
All output signal are AnalogSignals.
All output signal are AnalogSignals.
Upsample for any signal type.
Upsample for any signal type.
Upsample for any signal type.
Supported Waveforms of the signal generator.
Provides t, period and amplitude to subclasses.